![How to install a liquid damp proof membrane]({"bg": "//theme.zdassets.com/theme_assets/14582959/94f4652fef27dfc3fca756851e65fb7d5d0b88fc.jpg"})
![How to install a liquid damp proof membrane]({"bg": "//theme.zdassets.com/theme_assets/14582959/d38d9cc5a4fcb160800cb7a8f0e0cb60aaa36d2e.jpg"})
BAL DPM is resistant to water, chemicals, grease and pollutants, and can be used internally or externally either as a DPM, primer, waterproofer or residual moisture suppressant. As an easy, two-part waterproofer BAL DPM is perfect for basements, showers, wetrooms and bathrooms. Use as a damp proof membrane on concrete up to 98% RH and anhydrite up to 87% RH.
0
0
Was this article helpful?
0 out of 0 found this helpful
Articles in this section
- More time to fix large format tiles with new BAL XL Floor One
- How to back butter tiles with BAL Flex One
- How to Clean off Grout with an Emulsifying Pad
- How to cut BAL Board
- How to overboard stud walls
- How to lay porcelain tiles onto a concrete patio
- How to lay 20mm porcelain tiles onto Type 1 MOT
- How to waterproof with BAL Waterproof 1C
- BAL Grout Flex Wide Joint - Demo Video
- How-to waterproof with BAL DPM
Add comment
Article is closed for comments.