Featuring sound-reduction properties, BAL Single Part Fastflex is a highly flexible S2 tile adhesive and can also be utilised as isolating, anti-fracture underlay for ceramic tiles. Recommended for areas subject to limited movement and vibration, BAL Single Part Fastflex is water/frost resistant and is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, slate and certain natural stones including marble, terrazzo in dry or wet interior and exterior environments.
If you’re looking for an highly flexible S2 tile adhesive then this is the product for you. Available in 12.5kg packs, BAL Single Part Fastflex can be grouted after five hours. Please note this product is not suitable with BAL Rapid Mat/BAL Flexbone products, and when used on walls, battons will be required. Contact TAS when recommending approved sound-reduction systems.
Download the latest datasheets and certificates here;
BAL Single Part Fastflex Technical Datasheet (TDS)
BAL Single Part Fastflex Grey Health & Safety Datasheet (SDS)
BAL Single Part Fastflex White Health & Safety Datasheet (SDS)
BAL Single Part Fastflex Grey Declaration of Performance (DOP)
BAL Single Part Fastflex White Declaration of Performance (DOP)
BAL Single Part Fastflex Grey EU Declaration of Performance (DOP)
BAL Single Part Fastflex White EU Declaration of Performance (DOP)
BAL Single Part Fastflex Grey Environmental Product Declaration (EPD)
BAL Single Part Fastflex White Environmental Product Declaration (EPD)
USE FOR:
Most types of FLOOR and WALL tiles including:
- Ceramics
- Porcelain and fully vitrified tiles
- Mosaics
- Natural Stone including marble
- Slate
Most substrates including:
- Asphalt (suitable grade e.g. flooring)
- Concrete, cement:sand screeds and rendering
- Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone
- Fibre reinforced cement boards and lightweight tile backer boards
- Tongued and grooved floorboards
- Underfloor heating
Other substrates that may be suitable include:
Single layers of chip / ply, floating timber floors, Steel, Epoxy coatings and glazed tiles
POT LIFE AT 20C: 45 Minutes
GROUT AFTER: 5 hours
COLOUR: Grey and White
CLASSIFICATION: BS EN 12004 C1S2