Tiling over old tiles? It's easy with BAL Flexbone 2Easy floating uncoupling mat. BAL Flexbone 2Easy is a unique loose-laid uncoupling mat where no adhesive is needed underneath – a truly uncoupled system! Because it is floating, only basic preparation is needed – simply sweep or vacuum solid, level floors and lay the mat. No remove of residue, bitumen or laitance. No priming needed. Tile immediately to contaminated, stained or cracked screeds and over bitumen.
Articles in this section
- How to lay and tile to an uncoupling mat
- How to tile to underfloor heating mats
- How to level a floor and tile in 30 minutes
- How to prime a screed
- How to split a bag of adhesive in half
- How to tile a wall with BAL Flex One
- How to lay BAL Flexbone VAried bonded uncoupling mat
- How to tile over old tiles
- The easy clean, non staining grout
- How to grout a floor with BAL Absolute Grout