The mixing ratios for BAL Absolute Grout are as follow:
Absolute grout - All colours except white
Part A - 0.46KG 23%
Part B - 0.155KG 7.8%
Filler - 1.385KG 69.3%
Absolute Grout - White
Part A - 0.52KG 26%
Part B - 0.155KG 7.8%
Filler - 1.33KG 66.3%
Part A represents the resin and Part B represents the hardener.
To mix small quantities, for example 10% of the grout you will need to use the following measurements;
Example 10% of white grout mix:
- 52g of resin
- 15.5g of hardener
- 133g of filler
Articles in this section
- Can I stop grouting half way through a job and come back to finish tomorrow?
- Can I use a grey adhesive with white tiles?
- Is it possible to mix 2 grouts together to make your own colour?
- Can I use levelling clips with Flexbone 2Easy?
- Why does grout appear darker when wet?
- What can cause silicone to turn yellow?
- What is the maximum depth you can use the BAL Grout Flex Wide Joint?
- Do you treat grout any differently when grouting externally vs internally?
- When mixing up a test batch of Absolute grout what are the quantities?
- Can Rapid Mat be used externally?