Can I stop grouting half way through a job and come back to finish tomorrow?
Provided that the correct water-to-mix ratio has been followed and the s...
Can I use a grey adhesive with white tiles?
It is not recommended to use grey adhesive with white tiles, as there is...
Is it possible to mix 2 grouts together to make your own colour?
We do not recommend mixing two grout colours together. Doing so can alte...
Can I use levelling clips with Flexbone 2Easy?
Unfortunately, they cannot be used with Flexbone 2Easy. This is because ...
Why does grout appear darker when wet?
Grout can appear darker when wet for a number of reasons. Firstly cement...
What can cause silicone to turn yellow?
Silicone turning yellow is pretty common over time, and it usually comes...
What is the maximum depth you can use the BAL Grout Flex Wide Joint?
You can use the BAL Grout Flex Wide Joint up to 20mm deep and wide.
Do you treat grout any differently when grouting externally vs internally?
When grouting externally, you should treat the process differently to wh...
When mixing up a test batch of Absolute grout what are the quantities?
The mixing ratios for BAL Absolute Grout are as follow:Absolute grout - ...
Can Rapid Mat be used externally?
We don't recommend our mats to be used externally.
Which side of BAL board do you tile on to?
You will need to tile over the rough face of the board, that face provid...
Do BAL manufacture a tile adhesive that can be used on a green screed?
Unfortunately we don't have a suitable tile adhesive or levelling compou...