When grouting externally, you should treat the process differently to when you are grouting internally. Firstly the external temperature should always be checked before grouting. Please note that our cement based grouts should be applied when the temperature is a minimum of 5 degrees centigrade and our epoxy grout when the temperature is a minimum 10 degrees centigrade. Please take into consideration that direct wall and floor temperatures may differ to air temperatures. Ensure that the area to be grouted has dry joints and is not subjected to rain after grouting – this may mean covering the external floor with a polythene sheet after the grouting process to protect the grout from rain during the curing process. Please be aware that higher temperatures will shorten and lower temperatures will extend the working time. Ensure that all products are stored out of direct sunlight, and cementitious products are mixed with clean cold water.
Articles in this section
- Can I use silicone in place of grout to fix small holes?
- Do BAL have an adhesive for tiling on to bonding plaster?
- Is BAL Micromax3 Eco UV protected?
- How long does BAL protective sealer need to be left on the tiles for?
- Can BAL levellers be used over Rapid-mat?
- Can BAL Absolute grout be used in a hot tub?
- Can I stop grouting half way through a job and come back to finish tomorrow?
- Can I use a grey adhesive with white tiles?
- Is it possible to mix 2 grouts together to make your own colour?
- Can I use levelling clips with Flexbone 2Easy?