![How to waterproof a background with BAL Tank-it]({"bg": "//theme.zdassets.com/theme_assets/14582959/94f4652fef27dfc3fca756851e65fb7d5d0b88fc.jpg"})
![How to waterproof a background with BAL Tank-it]({"bg": "//theme.zdassets.com/theme_assets/14582959/d38d9cc5a4fcb160800cb7a8f0e0cb60aaa36d2e.jpg"})
BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (approved design required).
0
0
Was this article helpful?
0 out of 0 found this helpful
Articles in this section
- More time to fix large format tiles with new BAL XL Floor One
- How to back butter tiles with BAL Flex One
- How to Clean off Grout with an Emulsifying Pad
- How to cut BAL Board
- How to overboard stud walls
- How to lay porcelain tiles onto a concrete patio
- How to lay 20mm porcelain tiles onto Type 1 MOT
- How to waterproof with BAL Waterproof 1C
- BAL Grout Flex Wide Joint - Demo Video
- How-to waterproof with BAL DPM
Add comment
Article is closed for comments.