30 results for "emptying pool water"
TN 22.23 Tiling in Swimming Pools - Construction Drying Times and Pool Filling and Emptying Rates
HEATING OF POOL WATER The recommended heating rate for pool water is 0.25°C per hour. As the temperature of Leisure Pool is maintained
TN 20.23 Swimming Pool Water Conditions and the Selection of Tile Grouts
the demands of the pool water supply and those chemicals selected for the treatment of the pool water. This is to ensure
TN 19.23 Movement Joints in Swimming Pools
them. Older pools could have movement joints within the pool shell, but these might be a potential source for water leakage.
BAL RIBA-approved CPD Seminar - Tiling in Swimming Pools
movement joints, as well as information on pool chemistry and pool filling and emptying, taking into account British and European
BAL LEVEL OUT
for tiling after 3 hours, walkable after 2 hours at 20C. Water content can be reduced if gradient levelling has to be carried
BAL MICROMAX3 ECO
ensures the water is maintained within the grout, ensures a more consistent finish and eliminates the risk of water staining
BAL QUICKSET CEMENT
hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including
BAL SPF S1
format wall tile and areas of total immersion in water such as swimming pools and showers. It is also suitable for installations
BAL GROUT FLEX WIDE JOINT
BAL Grout Flex Wide Joint is a water and frost resistant cementitious wide joint tile grout for walls and floors and is suitable
BAL GROUT FLEX
Highly flexible and water/frost-resistant, BAL Grout Flex is suitable for grouting wall tiles with joints up to 5mm. Recommended