TN 01.23 - Use of Cement Based Products in Warm Weather
FACTSThe mixing of water with a cement-based powder adhesive creates a c...
Kirsty W Kirsty W
TN 02.23 Tiling to Asphalt Floors
INTRODUCTIONMastic asphalt is a mixture of partially oxidised bitumen (H...
Kirsty W Kirsty W
TN 03.23 - Use of Primers and Bonding Agents
INTRODUCTIONPrimers and Bonding Agents are used to prepare a surface pri...
Kirsty W Kirsty W
TN 04.23 - Ceramic & Natural Stone Floor Tiling to Heated Sub-floors
INTRODUCTIONThere are a variety of different types of underfloor heating...
Kirsty W Kirsty W
TN 05.23 Tiling A Small External Patio & Ground Floor Terrace
There are five key elements to a successful installation1. A fully dried...
Kirsty W Kirsty W
TN 06.23 Common Issues With Grouting
INTRODUCTION Cementitious based grouts conforming to BS EN 13888 are ava...
Kirsty W Kirsty W
TN 07.23 Deflection of Sub-Floors and Rigid Finish
INTRODUCTION All rigid finishing materials will be affected by any movem...
Kirsty W Kirsty W
TN 08.23 Screed Drying Times
INTRODUCTION The estimated amount of time it takes for a screed to dry i...
Kirsty W Kirsty W
TN 09.23 Types of Movement in Tiling Installations
INTRODUCTION There are many types of movement within a tiling installati...
Kirsty W Kirsty W
TN 10.23 - Heavily Trafficked Floors & Hard Wheeled Traffic
INTRODUCTIONCeramic tiles are easy to install, hard wearing, durable and...
Kirsty W Kirsty W
TN 11.23 - Ceramic Wall Tiling in Shower Areas
INTRODUCTIONShower areas may take many forms from an attachment to taps ...
Kirsty W Kirsty W
TN 12.23 BAL DPM
INTRODUCTION BAL DPM is a multi-purpose two component, solvent free, low...
Kirsty W Kirsty W
TN 13.23 BAL Flexbone VAried
INTRODUCTIONBAL FLEXBONE VARIED is a high-performance bonded uncoupling ...
Kirsty W Kirsty W
TN 14.23 - BAL Flexbone 2 Easy
INTRODUCTIONBAL FLEXBONE 2EASY is a 3mm thick, loose-laid, 100% uncoupli...
Kirsty W Kirsty W
TN 16.23 Tiling to Gypsum Plaster Walls
INTRODUCTIONPlaster is a material commonly used to create smooth wall su...
Kirsty W Kirsty W
TN 17.23 BAL Primers
INTRODUCTIONPrimers and Bonding Agents are used to prepare a surface pri...
Kirsty W Kirsty W
TN 18.23 Natural Stone Tiles with Mesh Reinforcement
INTRODUCTIONThere has been an increase in recent years in the number of ...
Kirsty W Kirsty W
TN 19.23 Movement Joints in Swimming Pools
MOVEMENT JOINT LOCATIONIf possible, movement joints within the structura...
Kirsty W Kirsty W
TN 20.23 Swimming Pool Water Conditions and the Selection of Tile Grouts
INTRODUCTION Tile grouts conforming to BS EN 13888 should be specified a...
Kirsty W Kirsty W
TN 21.23 The Installation of Resin Agglomerate Stone Tiles
INTRODUCTIONResin agglomerated tiles have become increasingly a popular ...
Kirsty W Kirsty W
TN 22.23 Tiling in Swimming Pools - Construction Drying Times and Pool Filling and Emptying Rates
INTRODUCTIONStresses can be created in tiling as a result of movement be...
Kirsty W Kirsty W
TN 23.23 Tiling to Timber Floors
INTRODUCTIONBefore laying tiles on any timber base there are several fac...
Kirsty W Kirsty W
TN 24.23 Tiling to Anhydrite/Calcium Sulfate Based Screeds
WHAT IS A CALCIUM SULFATE BASED SCREED Instead of a cement-based binder,...
Kirsty W Kirsty W