BAL Bedding Mortar is a special cement with graded fillers for producing a high performance mortar bed for external use, allowing external pavers and tiles to be fixed to the requirements of BS 7533-4. Bed depth can be achieved from 10mm up to 100mm thickness (minimum 25mm on MOT Type 1).
Pre-blended – just add water, BAL Bedding Mortar is easy to mix and lay up to 100mm in a single application. With more than 1hr working time and walkable in 12 hours it provides the perfect bedding system for 20mm porcelain, stone and pavers. It is also freeze-thaw resistant – protecting external installations against damage. Suitable on both bonded and unbonded backgrounds including concrete and Type 1 MOT.
Use with BAL Priming Slurry Bond.
Download the latest datasheets and certificates here;
BAL Bedding Mortar Technical Datasheet (TDS)
BAL Bedding Mortar Health & Safety Datasheet (SDS)
USE FOR:
- External Dry or Wet Applications
- Laying a mortar bed before fixing external pavers and
tiles - Bed depth from 10mm (Min 25mm on MOT Type 1) up
to 100mm thickness - Domestic or commercial use.
CAN BE WALKED ON AND GROUTED AFTER: 12 hours
SIZE: 25kg