A rapid-strength, low shrinkage quickset cement for use in screeds and renders, BAL Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. BAL Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.
Fixers will appreciate BAL Quickset Cement for its versatility and on-site performance, providing a fast-track screed that accepts foot traffic sooner than other products. Crucially on key installations significant time savings are made compared to using traditional OPC screeds, for example three weeks on swimming pool installations or 15 days for under floor heating. It’s improved flexural and compressive strength allowing for learner mix ratios helping to reduce your costs.
Download the latest datasheets and certificates here;
BAL Quickset Cement Technical Datasheet (TDS)
BAL Quickset Cement Health & Safety Datasheet (SDS)
BAL Quickset Cement Declaration of Performance
BAL Quickset Cement EU Declaration of Performance (DOP)
BAL Quickset Cement Environmental Product Declaration (EPD)
USE FOR:
- screeding or rendering to prepare wall and floor surfaces prior to installing most tile types
- dry/wet – interior/exterior
- fast-setting: accepts foot traffic in 3 hours
MAY BE TILED AFTER:4 hours (on bonded screed); 48 hours (on un-bonded or floating screeds)
COLOUR: Grey