BAL Waterproof 1C is a ready-to-use, rapid-setting one-coat waterproofing system for tiling in internal wet areas. Ready to tile after only 2 hours, Waterproof 1C can be applied with a brush, trowel or roller and no mixing is required! What’s more it can be used without priming on certain backgrounds, and provides crack bridging without tape on static cracks or board joints up to 3mm. Includes Fibre Strand Technology for improved strength.
A one-coat solution without the faff, BAL Waterproof 1C is suitable for all internal domestic and small commercial applications. Easy to apply straight out of the bucket, it provides coverage of up to 6m2 – perfect for any domestic shower, bathroom or wetroom. Provides complete protection against water ingress, giving clients’ peace of mind that their projects will last the test of time. Where priming is required use BAL Primer 1C.
EAD Certified for NHBC tanking regulations with ETA-24/1129
Download the latest datasheets and certificates here;
BAL Waterproof 1C Technical Datasheet (TDS)
BAL Waterproof 1C Health & Safety Datasheet (SDS)
BAL Waterproof 1C EMICODE Certificate
BAL Waterproof 1C Environmental Product Declaration (EPD)
BAL Waterproof 1C EAD Certificate
USE FOR:
- flexible, seamless one-coat waterproofing before tiling
- most substrates
- dry/wet interior
- showers, bathrooms, kitchens, laundry/utility rooms
- around drainage channels, upstands, pipes and floor wastes
- crack bridging 2-3mm
MAY BE TILED AFTER: 2 hours
COLOUR: Light Grey
EAD Certified: ETA-24/1129