A rapid-setting levelling compound, BAL Level Fast can be walked on after only 30 minutes and tiled on after 45 mins. Level Fast can be used from 2mm to 30mm – including only 3mm over timber. Formulated with Fibre Strand Technology for extra flexibility and strength, there is no need for spike rolling – saving significant project time. With a 10 minute bucket life and 10 minute wet edge, it gives you longer time with each mix.
BAL Level Fast provides the perfect time-saving start to any tiling project with key features including self-smoothing, self-healing and a low-shrinkage technology. With a one-pour technology it can be used over most substrates including concrete, sand:cement screeds, overlaid timber and crucially underfloor heating installations.
Download the latest datasheet and certificates here;
BAL Level Fast Technical Datasheet (TDS)
BAL Level Fast Health & Safety Datasheet (SDS)
BAL Level Fast Declaration of Performance (DOP)
BAL Level Fast EU Declaration of Performance (DOP)
BAL Level Fast Environmental Product Declaration (EPD)
USE FOR:
- Preparing floors for tiling
- Most substrates
- Dry/Wet
- interior
- Suitable for timber floors at 3mm
- Walk on after 30 mins
- 10 min wet edge
- Level background from 2mm to 30mm.
- Suitable for use with Underfloor Heating
- Self-smoothing and self-healing.
- No need to spike-roll.
MAY BE TILED AFTER: 45 minutes
COLOUR: Grey
COVERAGE: 4m2 at 3mm thickness